Lg-D295 Tested Farmware Flash By Octoplus Box Free

Download

Lg-D295 Tested Firmware All Is Well No Dead Risk Just Enjoy

Write firmware

1. Remove SD and SIM cards from phone;
2. Connect powered-on phone to PC with P999 cable;
3. Install necessary driver;
4. Select firmware file;
5. Click "Write firmware" button;
6. Follow software instructions (prompts).

Note: To connect the phone in Normal Mode, do the next: Go to "Settings -> Networks -> Tethering & Networks -> Turn on "USB tethering".
Note: If it is not possible to write firmware or during firmware writing occures error, you need to put manualy phone into Emergency mode
Note: Please, make sure the phone's battery is fully charged. Disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs. To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Qualcomm-based devices). You should not run any other programs or attach new devices to your computer during the flashing! Please, follow these simple precautions to avoid damaging your phone.
Note: Please, don't upgrade/downgrade firmware version, if it is not necessary.
         Downgrade may lead to phone damage!
         Writing phone firmware is at your own risk!